Ford Tractor Repair Manual Models 1100, 1110, 1200, 1210, 1300, 1310, 1500, 1510, 1700, 1710, 1900, 1910, 2110

An integral hydraulic power assist steering gear is available on some models. On all models except 2110, a priority valve is used to divert part of the flow from the hydraulic lift system pump to operate the power steering.

On 2110 models, a separate hydraulic pump supplies fluid to steering gear assembly. The pump is located on the left side of engine and driven by the camshaft gear.

On all models, steering wheel free play can be adjusted externally. Desired free play is 20-30 mm (3/4 - 1 1/8 inches) measured at outer rim of steering wheel. If free play is excessive, adjust sector shaft to ball nut clearance as follows:

Start engine and run at idle speed. Loosen locknut (30-Fig. 32) and turn adjusting screw (45) clockwise to reduce free play to desired setting. Tighten locknut after adjustment is completed.

• Detailed illustrations and exploded views
• Troubleshooting sections covering most models
• Brakes
• Cooling system
• Differential
• Electrical system
• Engine
• Final drive
• Axles
• Hydraulics
• Transmission
• Condensed service data information
• Detailed index

• Accurate information in a concise, easy-to-use format
• Durable, coated paper stands up to messy shop jobs