The Massey-Ferguson Repair Manual TO35, MF35, MH50, MHF202, MF50, MF202, MF204, F40 covers tractor models indicated.
Note: this tractor repair manual does NOT include wiring diagrams.
Book Excerpt: Massey-Ferguson Repair Manual TO35, MF35, MH50, MHF202, MF50, MF202, MF204, F40
STANDARD DIESEL ENGINE AND COMPONENTS
RandR ENGINE WITH CLUTCH
62. To remove the engine and clutch as a unit, first drain cooling system and if engine is to be disassembled, drain oil pan. Shut off the fuel. Remove the hood, disconnect injection nozzle leak-off line and both lines form thermostat reservoir. Disconnect line from water trap and sediment bowl.
Remove two rear fuel tank support cap screws. Remove nuts and springs on two front tank support bolts and remove tank.
Disconnect upper and lower radiator hoses at radiator. Disconnect both drag links and radius rods at the forward end. Disconnect radiator support rod at thermostat housing. Remove air cleaner to manifold hose. Block tractor up under transmission housing, unbolt axle support from engine and roll the axle support and wheels assembly away from tractor.
69. Rocker arms and shaft assembly can be removed after removing the fuel tank and rocker arm cover. The rocker arms, being right and left hand assemblies, are not interchangeable. Each rocker arm is fitted with a bushing which can be renewed if rocker arm is in otherwise good condition. Ream bushing after installation, if necessary, to provide a free fit for the shaft. Replacement arms contain a factory installed bushing.
Refer to paragraph 64 for valve tappet gap.
Subject: Massey-Ferguson farm tractor service, maintenance, repair. ISBN-10: 0872881245 | ISBN-13: 9780872881242 | Clymer MF14