This repair manual covers 2000-2006 Toyota Tundra and 2001-2007 Toyota Sequoia 2WD and 4WD pick-up trucks, US and Canadian models.
Book Excerpt: 2000-2007 Toyota Tundra, Sequoia Repair Manual VALVE CLEARANCE CHECK AND ADJUSTMENT
(Every 60,000 miles or 48 months)
Subject: 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007 Toyota Tundra, Toyota Sequoia service, maintenance, repair. ISBN-10: 1563929120 | ISBN-13: 9781563929120 | Chilton 68609
Book Excerpt: 2000-2007 Toyota Tundra, Sequoia Repair Manual VALVE CLEARANCE CHECK AND ADJUSTMENT
(Every 60,000 miles or 48 months)
- Refer to Chapter 2A or 2B and position the number 1 piston at TDC on the compression stroke.
- Disconnect the cable from the negative terminal of the battery.
- Disconnect the coil (and, on V6 engines, the spark plug wires) and remove any other components that will interfere with valve cover removal.
- Blow out the recessed area around the spark plug openings with compressed air, if available, to remove any debris that might fall into the cylinders, then remove the spark plugs (see Section 28).
- Remove the valve cover (see Chapter 2A or 2B).
Subject: 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007 Toyota Tundra, Toyota Sequoia service, maintenance, repair. ISBN-10: 1563929120 | ISBN-13: 9781563929120 | Chilton 68609
TABLE of CONTENTS:
Introduction: About this manual | Introduction | Vehicle identification numbers | Maintenance techniques, tools and working facilities | Buying parts | Jacking and towing | Booster battery (jump) starting | Conversion factors | Automotive chemicals and lubricants | Safety first! | Troubleshooting
- Tune-up and routine maintenance
- 3.4L V6 engine
- 4.0L V6 engine
- 4.7L V8 engine
- Engine and overhaul procedures
- Cooling, heating and air-conditioning systems
- Fuel and exhaust systems
- Engine electrical systems
- Emissions control systems
- Manual transmission
- Automatic transmission
- Transfer case
- Brakes
- Suspension and steering systems
- Body
- Chassis electrical system
- Wiring diagrams
